Use and maintenance of BF type flotation machine should pay

1, a BF type flotation machine system of units (total volume) can be determined on the basis of the practice of beneficiation test or a similar plant, each operation units should not be too small to avoid short circuit.

2, to prevent lump ore and debris falling into the flotation tank, so as not to affect the normal production of jammed impeller.

3, allow to be mine, pulp soaked and then drove the impeller, so as to avoid splashing mine.

4, to the mine completely cut off after parking, parking should be mine.

5, in the production, according to the separation requirements by electric or manual gate regulation of discharge, required to maintain the liquid level height.

6, inspiratory capacity according to the ore properties and different separation requirements, adjusted by the suction valve.

7, production, it is necessary to pay attention to check the motor bearing temperature, to regularly to each lubricating point oiling and maintenance of BF type flotation machine equipment normal operation and production of civilization.

Operation 8, regularly check the main bearing and a year cleaning time and add yellow dry oil, regular maintenance, replacement of worn parts.