Block Machine

Block Mould

Block Mould


Block Mould and Bottom of Mould:

Combining with mould base plate,block mould can be used to contain slurry. The slurry will become cake after static curing and  foaming .Then,with the supporting of mould base plate,the cake will be sent to the cutting machine for cutting.After being out ,the cakewill be numbered and then sent to the autoclave for steam curing by steam curing cart.Slurry could be held in the combining of Block mould and side plate.after curing it would be solidified into the block.the side plate could load the block which shall be cut by the cutting machine and feed into the autoclave to be hardened together with trolley.

Autoclaved Aerated Concrete Block Machine:
This mould has 4 side plates and a bottom plate,all of the side plates can be opened .
When the block is stiff enoughto be cut,the side plates of the mould are opened by hand or machine and the mould is moved on cutting line also,after cMOULDutting ,the block with muld is moved down from cutting line.

Materials slurry can be held in the combining of the mould and the side plates. After curing and foaming it can be solidified into the blank. The side plate can bear the blank which shall be cut by the cutting machinery. And feeding into the autoclave to be hardened together with the hardening car.
The hardening car is a carrier to carry the side plates and the blank to enter and leave the autoclave.

Main Technical Date of Block Mould:

Serial Number Size Hanging weight
1 4M 4040X640X1235
2 6M 6050X670X1250

please leave a message if you have any question :

Thank you for your interests in our company. You can contact our head-office directly, also you can feel free to submit your inquiry to us. Of course, phone is available and you can get help immediately.

SENT INQUIRY